Please double check to the following: 1 . Is your sound bar plugged into the AC outlet? 2 . Did you connect the Optical and HDMI cables? 3 . Did you select the correct source on the sound bar (press...Date Updated: 11/08/2023
To set up your Polk Command Bar, check if your TV has got an HDMI input, labelled "ARC". If your TV does not have an ARC-enabled HDMI input, connect the Command Bar to your TVs Optical output. We...Date Updated: 22/06/2023
The MagniFi Max sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal or the subwoofer was replaced or you want to...Date Updated: 11/08/2023
If you experience issues with your Command Bar or the supplied remote control, it may be necessary to reset to factory defaults. To reset your device, press and hold the button...Date Updated: 11/08/2023
If you experience issues with your Magnifi soundbar or the supplied remote control, it may be necessary to reset to factory defaults . Depending on the model, the procedure is slightly different...Date Updated: 11/08/2023
To update the firmware on the Polk MagniFi Mini, you must be connected to the Internet via Wi-Fi or a cable using the built-in Ethernet port on the back of the MagniFi Mini (network cable not...Date Updated: 11/08/2023
To change the Wi-Fi network your MagniFi Mini / Max (SR) is connected to, simply open up the Google app on your phone, tablet or computer and tap the gear icon on your MagniFi Mini. From the...Date Updated: 07/02/2024
To set up your Polk Assist, first of all, you need to plug it in and it will power on automatically. Once it is plugged in, after about a minute, the Polk Assist is ready for the setup. The speaker...Date Updated: 22/06/2023
Make sure you have a strong Wi-Fi signal where the sound bar is located. Remember, it’s a smart idea to move the sound bar closer to the router during setup since it will retain the setup information...Date Updated: 11/08/2023
If you experience issues with your Signa Solo or the supplied remote control, it may be necessary to reset to factory defaults . To reset your device, turn it on and press and hold...Date Updated: 26/07/2023